Our range of Karcher electric pressure washers are available with various nozzles to direct the spray of water in different ways for a number of outdoor tasks.
For example, you may need to change to a high-pressure nozzle when looking to remove moss from your patio after using a softer spray nozzle for cleaning your car.
Changing the nozzle on your pressure washer is designed to be easy, and for our latest blog, we are going to explain this in four simple steps.
4 Steps to Removing Nozzles from Pressure Washers
1. Switch the pressure washer off by turning the power dial to the position that is marked ‘0’.
2. Twist the nozzle where it meets the trigger handle counterclockwise which detaches it from the pressure washer.
3. Insert the new nozzle into the trigger and turn it clockwise which locks it into place.
4. Turn the pressure washer back on and your new nozzle will be ready to use.
Turbo Nozzles available from Britclean
The turbo nozzle increases cleaning performance by up to 30% without putting any extra load on the machine itself.
Our turbo nozzles produce a very fine jet of water that is offset at an angle which then sprays round in a circle and produces a cutting and hammer action which makes it ideal for using on milking parlour walls or removing stubborn debris.
Getting the correct size of the nozzle is important as some areas do not suit the use of turbo nozzles. One example is when you are cleaning your car but for a number of other jobs, they will produce superb results.
Get in Touch for More Information
If you would like to know more about turbo nozzles from Britclean, please contact us today. You can also watch this short video about our turbo nozzles below – https://www.youtube.com/watch?v=jO-FetvJNwI